Select a page

{Tips} Color Correcting Underwater Photos

Don’t you just hate it when you take underwater photos and they all have this blue-green color cast?

We’ve had a few asks to share how we color correct our underwater photos. So here it is.

We’re sure there are many ways to achieve this and this is just one way we found to have worked for us (we’re not Photoshop experts, so there may be other ways to do this in Photoshop as well). Feel free to share if you have other ways to color correct underwater photos. We’d love to learn!

 

Why does this happen?

Well, light is actually made out of a combination of a spectrum of colors. The colors of the rainbow is basically light split out into its respective colors – Red, Orange, Yellow, Green, Blue, Indigo and Violet.

The colors disappear underwater in the same order as they appear in the color spectrum.

Underwater, the longest wavelength is the first to be absorbed – hence red is the first to be absorbed, followed by orange and yellow and so on. That is why, the warmer red, orange and yellows are the first colors to disappear from your photos, leaving the green and blue cast.

 

How do we color correct our underwater photos?

We use Photoshop’s Channel Mixer feature to restore the color red by “borrowing” from the blue and green pixels.

Here’s a basic rundown of the steps we take:

1  Check the Red, Green and Blue Channels of your image (“Channels” is the tab next to the “Layer” tab on the far right panel).

Blue Channel

Green Channel

Red Channel – Quite a contrast to the green and blue channels as you can see.

2 Back on the “Layers” tab, select “Channel Mixer” from the menu.

Note: make sure to select “RGB” again from the channel mixer view just now to make sure you’re back to the full RGB view and not the individual red/green/blue channels.

Channel Mixer

3 “Borrow” from the green and blue channel.

 

a) Select “Red” from the “Output channel” option
b) Slide the green slider to the right until you see some return of red pixels in your image.
c) Slide the blue slider to the left to balance out the overcompensation of the green turned red pixels
d) You can also play around with the red slider to adjust the luminosity of the few original working red pixels.

Channel Mixer

Before and after channel mixer adjustment

4  To further refine your image, select “Levels” from the menu.

“Levels”

5 Adjust black, white and midtone levels.

 

Go through each of the channels (Red, green and blue) and adjust the three “triangles” below the histogram.

We usually pull in the dark and light triangles so they touch the edges of the histogram. This works most of the time but always be sure to check the results on your image for the best location of the triangles. For more information on levels, here’s a great article about it.

Once you’ve adjusted all three levels, you should see improvements on both the color and contrast of the image.

Before levels adjustment for Green

After levels adjustment for Green

6 Once you’ve adjusted your channels and levels, you should already see a considerable improvement in your before and after image.

From here, apply other photo adjustments as needed such as hue, saturation, brightness, sharpening, clarity etc.

 

Final results

“Before”

“After”

We hope this helps you color correct your underwater photos.
Do let us know if you know of other ways that you’d like to share with us and other readers!

 

16 Comments

  1. Runy February 7, 2019 Reply

    This photoshop color correction process is really advance that you shared here. awesome and I learned here some uncommon idea. thanks

  2. Patrick Johnson August 6, 2014 Reply

    Nice tips and the photo also very nice… Colour correction is the process where every clip is manually tweaked to get a good exposure and balance of light. Each clip is adjusted to match color temperature to a predefined choice for each scene. This tedious and mechanical process is essential and in its own way, an art form.

  3. Natalia April 22, 2013 Reply

    This is really awesome. I definitely have a lot of underwater pics that are just “meh”. Time to bust out some Photoshop skills.

  4. @insidecr April 21, 2013 Reply

    {Tips} Color Correcting Underwater Photos http://t.co/4rI6eeRBPC via @idelishTravel

  5. Suzy
    Twitter:
    April 21, 2013 Reply

    Wow! That before and after is pretty impressive. I haven’t played around with underwater photography since probably my days at the pool as an 8 year old, but these are good tips to have.
    Suzy recently posted..Lincoln Travelogues: Notes on Traveling to the Famous for the Unknown JourneyMy Profile

  6. @constantramble April 16, 2013 Reply

    {Tips} Color Correcting Underwater Photos http://t.co/IEzuNyaRIz via @idelishTravel

  7. @thetravelfool April 16, 2013 Reply

    {Tips} Color Correcting Underwater Photos http://t.co/t4xIhBWnnM via @idelishTravel

  8. @OuiInFrance April 15, 2013 Reply

    {Tips} Color Correcting Underwater Photos http://t.co/FxVjmRtEeM via @idelishTravel

  9. Kieu ~ GQ trippin April 15, 2013 Reply

    Maybe Gerard should be leaving this comment, because it’s way too technical for my brain to comprehend.. lol. BUT I LOVE that you can correct under water photos! Our diving photos in Indonesia can be saved! Hehehe

  10. @walkingontravel April 15, 2013 Reply

    {Tips} Color Correcting Underwater Photos http://t.co/Sh2TrQnpGf via @idelishTravel

  11. @DestnUnknown April 15, 2013 Reply

    {Tips} Color Correcting Underwater Photos http://t.co/df31mhRN55 via @idelishTravel

  12. @MalloryOnTravel April 15, 2013 Reply

    {Tips} Color Correcting Underwater Photos http://t.co/teQ84G0A00 via @idelishTravel

Leave a reply to @DestnUnknown Click here to cancel the reply

Your email address will not be published. Required fields are marked *

*

CAPTCHA: Please answer the question (this helps us prevent spam). Thanks! *
Time limit is exhausted. Please reload CAPTCHA.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

CommentLuv badge

Copy Protected by Chetan's WP-Copyprotect.